Install guide
Your court, your weekend.
An overview of what install day looks like. Your order ships with a layout sheet specific to your court. Always follow that sheet where it differs from this general guide.
-
01 · PREP
Clean the surface
Sweep and blow off the slab. Remove debris, standing water and anything that sticks up. Tile follows the surface under it, so fill notable cracks or low spots first.
-
02 · LAYOUT
Mark your starting lines
Using your layout sheet, snap a chalk line for your starting edge and check it's square with a 3-4-5 triangle. Starting straight is the single biggest factor in a straight court.
-
03 · TILES
Snap tiles together
Work outward from your starting corner. Tiles lock together at the edges by hand; press or tap each connection until it seats flat. Pallets are labeled to match your layout, so lines and graphics land where they should.
-
04 · EDGES
Fit the perimeter and edging
Leave the expansion gap shown on your layout sheet at fixed edges like walls and posts. Tiles move slightly with temperature. Then attach the edging pieces around the open perimeter.
-
05 · CHECK
Walk it and play
Walk the whole court and re-seat any connection that isn't flat. Then send us a photo. We'd love to see it.